4kW Oil Immersion Heater.

Description

Our 4kW Oil immersion Heater features:

• 10mm diameter Incoloy 800 elements, with huge great wide open spaces between elements for cleaning purposes
• 2.25″ BSP Brass Screwplug
• 6″ or 150mm inactive or cold end
• 33″ or 830mm  immersed length
• ABS IP65 terminal enclosure rotateable through 360 degrees
• 3 w/cm² or 19w/in² watt density
• 4 WIRE STAR 3 Phase
• complete with 11″ thermowell.

Call Jamie on 01827 215684 to discuss your 4kW Oil Immersion Heater requirements.

If these stock heaters do not fit your needs, we can supply bespoke heaters to suit, usually within a 2 week timeframe. If youare really desperate, you can pay a premium, circa 50%ish,  to jump the queue and get them in a coupla days.

For an explanation of watt density, have a look here.

For further information on how to choose an oil immersion heater, click here.

Basically, for oil heaters our target is to get the watts density down to 12w/in² or below for heavy, industrial oils, and 25w/in² or below for lighter cooking/thermal transfer oils.

So, this 4kW Oil Immersion Heater at 19w/in² is appropriate for light oils.

Useful 4kW Oil Immersion Heater Background information.

Industrial Heating elements are a resistance coil wire (producing heat), encased in magnesium oxide (the white powder, compacted by rolling down from 10mm to 8mm, for protection of wire & insulation purposes, bizarrely) encased in a usually stainless steel tube. For more detailed written explanation, click here. For a video explanation by some bloke with a really boring voice, click above.

Just for clarification, an Immersion Heater (see below) is 3 such elements (as image above) on a screwplug with a terminal box housing the connections. Cuz we all speak diffrent!

We can supply Industrial Heating Elements